2GIG Z-Wave Thermostat (CT30e) - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG Z-Wave …
2GIG Z-Wave Thermostat (CT30e) - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG Z-Wave …
2GIG GC3 Panel Version 3.1 - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Pan…
2GIG GC3 Panel Version 3.1 - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Pan…
2GIG GoControl Panel - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoContr…
Improve Image Sensor signal strength with a 2GIG GoControl
2GIG Image Sensors do not show the signal strength due to the radio frequency (RF) protocol used by 2GIG. However, 2GIG panels can check if the Image Sensor is connected to the network through the native Sensor Test menu. To access Sensor Test from the panel: * Tap Security . * Tap Menu . * Enter the master o…
Interact with a Z-Wave device from a 2GIG GC3
he 2GIG GC3 panel allows users to interact with Z-Wave lights, locks, thermostats, and garage devices locally at the panel. Note : Additional Z-Wave devices may be able to be added and controlled locally. For more information, refer to the device manufacturer. To interact with Z-Wave lights from a 2GIG GC3: * Tap…
2GIG GoControl - Sensor Restorals
Sensor restorals are sent if a sensor triggers an alarm and is then closed or reset before the system is disarmed. Important : Sensor restorals are forwarded only if the sensor is closed before disarming the panel. If the panel is disarmed with the sensor open, then the sensor is closed after disarming, a restoral i…
Find the firmware version of a 2GIG GC3
The firmware version of a 2GIG GC3 can be found locally using the panel. To find the firmware version of a 2GIG GC3 using the control panel: * On the home screen, tap System Info and Usage . * Tap System Info . The firmware version displays.
2GIG Z-Wave Thermostat (CT-100) - Battery Replacement
Alarm.com is choosing to end support for the 2GIG CT-100, the 2GIG CT-30, and the GE TSTAT-300 thermostats. It will not be possible to control those thermostats from the app or website for any new accounts created or accounts recycled after May 27th, 2018. Older accounts created before that date will not be affected.…
