(Discontinued) 2GIG GC3 Image Sensor (2GIG-IMAGE2) - Installation Guide
Product overview The Image Sensor for 2GIG GC3 panels is a pet immune PIR (passive infrared) motion detector with a built-in camera. The sensor is designed to capture images during alarm or non-alarm events. Users can also initiate image capture on-demand to Peek-In on their property. Images are stored locally and …
Verify the firmware version of a TS1 keypad and 2GIG GoControl panel are compatible
A TS1 is able to learn into a panel whether it is an older or later firmware version than the 2GIG GoControl panel, but the devices must be on the same firmware version to fully communicate properly. Currently, the only exception is firmware version 1.10, where both the panel and the TS1 need to be on version 1.10 fo…
2GIG GoControl Image Sensor ADC-IS-100-GC - Installation Guide
2GIG part number: 2GIG-IMAGE1 Alarm.com part number: ADC-IS-100-GC Product summary The Image Sensor is a pet immune PIR (passive infrared) motion detector with a built-in camera. The sensor is designed to capture images during alarm or non-alarm events. Users can also initiate image capture on-demand to Peek-In …
2GIG Super Switch Takeover Module (2GIG-TAKE-345) - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG Super…
2GIG GoControl Image Sensor ADC-IS-200-GC - Installation Guide
2GIG part number: 2GIG-IMAGE1 Alarm.com part number: ADC-IS-200-GC Alarm.com Image Sensor for 2GIG GoControl Product summary The Image Sensor is a pet immune PIR (passive infrared) motion detector with a built-in camera. The sensor is designed to capture images during alarm or non-alarm events. Users can also ini…
2GIG GoControl - Equipment Codes
Equipment Code Equipment Description Panel firmware version required 9999 Alarm.com Image Sensor Note : Must be added at the panel 1.10+ 1062 2GIG Tilt Sensor 1.19+ 1064 2GIG Bypass Sensor 1.14+ 1065 2GIG Flood Sensor 1.14+ 1066 2GIG Shock Sensor 1…
2GIG GC3 Image Sensor (ADC-IS-300-LP) - Installation Guide
Product summary & technical specifications The Image Sensor is a pet immune PIR (passive infrared) motion detector with a built-in camera designed to capture images during alarm or non-alarm events when motion is detected. Product features: * Communicates wirelessly to the security control panel * 35 foot de…
2GIG GoControl - Cellular Module Installation Guide
It is strongly suggested to perform the steps shown in this guide in your office or lab at least 24 hours before going to the installation site. This ensures that the SIM card will be ready to communicate with Alarm.com and also allow you to detect any possible problems before going to the client site. The advantage…
(Discontinued) 2GIG Doorbell (2GIG-DBELL1-345) - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG Doorb…
2GIG GC3 - Equipment Codes
Required for all wireless zones, keyfobs, and keypads. For information on the loop number to program, refer to the device's installation manual. Wireless Zones - Equipment Codes Equipment Code Description 0000 Other 0862 2GIG Thin D/W (Surface) Contact 0863 2GIG Recessed Door Contact 0869 2GIG PIR wi…
