Configure an auto phone test on a Qolsys IQ Panel 2
Auto phone tests, also called Timer or Periodic Tests, help verify that a system is communicating and that the monitoring station is receiving signals. The process is different from panel to panel, and can be programmed from different ways. If the monitoring station is not receiving auto phone tests, see Monitoring…
Clear a Severe Weather Alert from a Qolsys IQ Panel 2
Severe weather alerts to the panel notify customers of incoming dangerous weather. The alerts only come in for tornado, fire, or tsunami warnings. When an alert comes in, there is a series of audible beeps and a message on the panel. For more information about severe weather alerts, see Severe Weather Alerts . Not…
Enable Doorbell Camera Notifications to Qolsys IQ Panel 2
Receive notifications on the Qolsys IQ Panel 2 screen when a doorbell camera detects motion or the button is pushed. Requirements To enable doorbell camera notifications to the Qolsys IQ Panel 2: Service package A service package that supports at least one doorbell camera. Panel hardware Firmware versio…
Qolsys IQ Panel 2 Software Version 2.4.0 - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. New features in this firmware release The following new features…
Enable Weather to Panel on a Qolsys IQ Panel 2
Alarm.com offers weather to be displayed on compatible panels. The Qolsys IQ Panel 2 is compatible with Weather to Panel . Enable Weather to Panel * To enable Weather to Panel, verify Weather to Panel is selected as an add-on to the customer's service package using the Partner Portal or MobileTech app. For more…
Manage Z-Wave devices on a Qolsys IQ Panel 2
The Z-Wave controller on the Qolsys IQ Panel 2 is in the panel itself, so swapping the panel requires the deletion and addition of existing Z-Wave devices. The local Z-Wave control available by default, so there is no need to enable a specific setting to communicate through Z-Wave. For a full list of compatible Z-Wa…
Remotely Find the Serial Number for an Enrolled Sensor on a Qolsys IQ Panel 2
The serial number for sensors enrolled on a Qolsys IQ Panel 2 can be found remotely using the Partner Portal or MobileTech app. For information about finding the serial number for a deleted sensor, see Remotely find the serial number for a deleted sensor . To find the serial number of a sensor using the Partner Po…
Enable or Disable Auto Stay on a Qolsys IQ Panel 2
The auto stay feature is a way for panels to prevent false alarms. If arming locally, the customer must exit through an entry/exit sensor during the exit delay in order to have the panel arm away. Otherwise, it always reverts to arm stay. This is not the case when arming from an app or keyfob. To configure auto stay…
Upgrade the Firmware on a Qolsys IQ Panel 2
The Qolsys IQ Panel 2 has the option to remotely upgrade the panel, enable automatic updates, and also perform bulk upgrades to multiple panels. Important : The update is sent through IP only, so the panel must be disarmed and connected to Wi-Fi in order to send. Updates may take up to a few hours to apply at the p…
Clear a Panel Tamper on a Qolsys IQ Panel 2
When a panel tamper occurs on a Qolsys IQ Panel 2, the panel announces that there is a panel tamper and the trouble condition appears on Alarm.com. The tamper switch on a Qolsys IQ Panel 2 is the black button on the bottom left side on the back of the panel. How to resolve: * Affix the backplate onto the panel …
