Qolsys IQ Panel 2 Plus - Quick Install Guide
The guides attached to this page have been written by a third party and are not maintained by TrueHomeProtection.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 - Battery Replacement
The Qolsys IQ Panel 2 requires a special battery pack available for purchase from the manufacturer. To replace the battery in a Qolsys IQ Panel 2: If desired, put the system in test mode with the monitoring station before proceeding. For more information, see Put a system On Test with the monitoring station . Cau…
Send a Communication Test from IQ Panel 2
Sending a communication test from the panel initiates communication and verifies that the module is communicating on the cellular network. For this test to send a signal to the monitoring station, verify Manual/Auto Tests are selected as an Event to Forward in the customer's Monitoring Settings . For more info…
Find The Signal Strength of a Qolsys IQ Panel 2
Panel signal strength can be requested locally at the panel. To find the signal strength using the Qolsys IQ Panel 2: * Go to the home screen. * Tap Settings . * Tap Advanced Settings . * Enter the installer code. * Tap About . * Tap Cellular to view the Cellular Signal Strength .
Bypass a sensor on a Qolsys IQ Panel 2
On the Qolsys IQ Panel 2, it is possible to bypass an open contact sensor, or any sensor with a trouble condition (e.g., tamper, low battery, offline, etc.) when arming a system from the Customer Website or app. Simply sending an arming command will automatically bypass all zones that would prevent arming. A motion s…
Configure an auto phone test on a Qolsys IQ Panel 2
Auto phone tests, also called Timer or Periodic Tests, help verify that a system is communicating and that the monitoring station is receiving signals. The process is different from panel to panel, and can be programmed from different ways. If the monitoring station is not receiving auto phone tests, see Monitoring…
