Qolsys IQ Panel 2 Software Version 2.3.0 - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 Plus Smarter Business Temperature Monitoring - Installation Guide
Alarm.com Smarter Business Temperature Monitoring (SBTM) provides affordable, 24x7 monitoring and real-time equipment alerts to support the temperature control needs of restaurants, grocery stores, pharmacies, and other business properties. Fully integrated with the Alarm.com ecosystem, our advanced temperature monit…
Send Help Videos to the Qolsys IQ Panel 2
Instructional help videos for users can be sent to the Qolsys IQ Panel 2 remotely using the Partner Portal. All help videos are general How-To tutorials for panel features. Important : The panel must be on firmware version 2.1.0+ and connected to Wi-Fi to download the help videos to the panel. When the help videos …
Is the Qolsys IQ Panel 2 Plus compatible with the Image Sensor?
No. The Qolsys IQ Panel 2 Plus has a built-in PowerG daughtercard, which uses the same antenna as the Image Sensor daughtercard. For Image Sensor compatibility, it is recommended to use the Qolsys IQ Panel 2 or other panel. The Qolsys IQ Panel 2 and 2 Plus are both compatible with the PowerG PIR camera for images wh…
Enable/Disable Commercial Sensor and Device Names on the Qolsys IQ Panel 2
This feature enables a set of preset commercial sensor and device names in place of the residential names when installing devices into a Qolsys IQ Panel 2. Commercial names can be enabled or disabled using the panel, Partner Portal, or MobileTech app. Important : The Qolsys IQ Panel 2 must be on firmware version 2.…
Qolsys IQ Panel 2 Software Version 2.5.1 - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 - Image Sensor IQ Card Installation
The guides attached to this page have been written by a third party and are not maintained by True Protection. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Send a Communication Test from IQ Panel 2
Sending a communication test from the panel initiates communication and verifies that the module is communicating on the cellular network. For this test to send a signal to the monitoring station, verify Manual/Auto Tests are selected as an Event to Forward in the customer's Monitoring Settings . For more info…
Qolsys IQ Panel 2 Secondary Tablet (IQ Remote) - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. Note : The IQ Remote can be enrolled into the IQ Panel 2 on firmwa…
Qolsys IQ Panel 2 - Battery Replacement
The Qolsys IQ Panel 2 requires a special battery pack available for purchase from the manufacturer. To replace the battery in a Qolsys IQ Panel 2: If desired, put the system in test mode with the monitoring station before proceeding. For more information, see Put a system On Test with the monitoring station . Cau…
