Adjust the time to detect an AC power failure on a 2GIG GoControl
The amount of time AC power must be lost to trigger an AC power failure for a 2GIG GoControl is controlled by programming Question 38 (Q38). The value entered indicates the number of minutes that AC power must be lost for the status to send to the monitoring station, appear on Alarm.com, and trigger customer notific…
2GIG GoControl 4 Button Key Ring Remote - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoContr…
Send a message to a 2GIG GoControl
Enterprise Notices allow dealers to send messages to display locally at the panel using the Partner Portal or MobileTech app. There are multiple default messages to choose from that can be sent to the panel. This feature does not allow personalized messages to be sent to panel. Currently, the messages are only avail…
Find the firmware version of a 2GIG GoControl locally
The firmware version of a 2GIG GoControl can be found in the panel. The firmware version can also be found and requested remotely using the Partner Portal and MobileTech app. For more information about remotely finding the firmware version, see Find or request the firmware version of a panel . To find the firmwar…
2GIG GoControl Image Sensor IS-220-GC - Data Sheet
The Image Sensor (model ADC-IS-220-GC) is compatible with the 2GIG GoControl panel with firmwares 1.10+. A cell radio and a 900 MgHz XCVR2 transceiver are required. The Image Sensor is a breakthrough new product that combines a PIR (Passive Infrared) motion sensor, an integrated still camera, completely wireless com…
Interact with a Z-Wave device from a 2GIG GoControl
The 2GIG GoControl 1 and 2 panel allows users to interact with Z-Wave lights, thermostats, locks, and garage devices locally at the panel in the Services menu. For information on adding Z-Wave devices, see Manage Z-Wave devices on a 2GIG GoControl . Note : Additional Z-Wave devices may be able to be added and con…
Adjust the Image Sensor PIR sensitivity on a 2GIG GoControl
PIR sensitivity settings By default, the Image Sensor is configured with a standard motion sensitivity profile Normal . The sensor can also be set to a more sensitive motion profile (i.e., High ) and a less sensitive profile with pet immunity for pets up to 40 lbs (i.e., Low ). The sensitivity can be configured …
Remotely find the serial number for an enrolled sensor on a 2GIG GoControl
The serial number for sensors enrolled on a 2GIG GoControl can be found remotely using the Partner Portal or MobileTech app. For information about finding the serial number for a deleted sensor, see Remotely find the serial number for a deleted sensor . To find the serial number of a sensor using the Partner Porta…
2GIG GoControl Panic Button Remote - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoContr…
2GIG GoControl - Monitoring Station Dialer Codes
Monitoring Station dialer codes are led with either a 1 or E to indicate the event signal and led with a 3 or R to indicate a restore signal. The event history on Alarm.com always displays the codes leading with a 1 to indicate the event and 3 to indicate the restore. Reporting Zones 2GIG Type Des…
