The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
The Qolsys IQ Panel 2 on firmware version 2.3.0+ can be set to have either 4-digit or 6-digit user codes. On firmware versions below 2.3.0, the Qolsys IQ Panel 2 can only have 4-digit user codes. Enable/disable 6 digit user codes The number of digits in a user code can be enabled or disabled using the Partner Port…
Bluetooth Low Energy (BLE) 4.0 is built into the IQ Panel 2. The Qolsys IQ Panel 2 allows for up to five mobile Bluetooth devices to be paired with the panel. Pairing mobile Bluetooth devices allow for Bluetooth disarm, which disarms the system from an armed away state when the connected mobile device comes within ra…
Auto phone tests, also called Timer or Periodic Tests, help verify that a system is communicating and that the monitoring station is receiving signals. The process is different from panel to panel, and can be programmed from different ways. If the monitoring station is not receiving auto phone tests, see Monitoring…
Severe weather alerts to the panel notify customers of incoming dangerous weather. The alerts only come in for tornado, fire, or tsunami warnings. When an alert comes in, there is a series of audible beeps and a message on the panel. For more information about severe weather alerts, see Severe Weather Alerts . Not…
Receive notifications on the Qolsys IQ Panel 2 screen when a doorbell camera detects motion or the button is pushed. Requirements To enable doorbell camera notifications to the Qolsys IQ Panel 2: Service package A service package that supports at least one doorbell camera. Panel hardware Firmware versio…
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. New features in this firmware release The following new features…
Alarm.com offers weather to be displayed on compatible panels. The Qolsys IQ Panel 2 is compatible with Weather to Panel . Enable Weather to Panel * To enable Weather to Panel, verify Weather to Panel is selected as an add-on to the customer's service package using the Partner Portal or MobileTech app. For more…
The Z-Wave controller on the Qolsys IQ Panel 2 is in the panel itself, so swapping the panel requires the deletion and addition of existing Z-Wave devices. The local Z-Wave control available by default, so there is no need to enable a specific setting to communicate through Z-Wave. For a full list of compatible Z-Wa…
The serial number for sensors enrolled on a Qolsys IQ Panel 2 can be found remotely using the Partner Portal or MobileTech app. For information about finding the serial number for a deleted sensor, see Remotely find the serial number for a deleted sensor . To find the serial number of a sensor using the Partner Po…