Alarm.com Smart Thermostat (ADC-T3000) - Battery Replacement
ADC-T3000 Smart Thermostat Battery Replacement Guide The Alarm.com Smart Thermostat (ADC-T3000) operates on two AAA Alkaline batteries . Proper battery maintenance ensures consistent thermostat performance and prevents HVAC issues. Key Considerations * If no batteries are installed and the thermostat is running…
Find the firmware of an Alarm.com Smart Thermostat
The firmware of an Alarm.com Smart Thermostat can be found locally on the thermostat, on the box, or on the Partner Portal. Note : To update the firmware of an Alarm.com Smart Thermostat, it must be replaced with a new one at this time. To find the firmware locally on the thermostat: ADC-T3000 * Press the butt…
Adjust the heat and cool setpoint ranges of the Smart Thermostat
To configure setpoints using the Customer Website: * Log into the Customer Website. * Click on the thermostat card. * Click the Advanced Configuration. * Using the dropdown menu, select the thermostat to configure . * In Heat Setpoint on the User tab, enter the minimum and maximum target temperatures for h…
Enable or disable motion-detected wake on an Alarm.com Smart Thermostat (ADC-T3000)
How to Enable Motion Wake on the Alarm.com Smart Thermostat (ADC-T3000) The Alarm.com Smart Thermostat (ADC-T3000) includes a motion sensor that allows the screen to automatically wake when nearby movement is detected. This feature enhances convenience by ensuring the display is always visible when someone approache…
Alarm.com Smart Thermostat is not controlling HVAC properly
Alarm.com Smart Thermostat Troubleshooting Guide The Alarm.com Smart Thermostat is designed for reliability and comfort, but occasionally issues may occur. If your thermostat is not controlling the HVAC system properly, use the following troubleshooting guide before contacting an HVAC professional. Common Issues …
Operate the Alarm.com Smart Thermostat
How to Operate the Alarm.com Smart Thermostat (ADC-T3000 & ADC-T2000) Locally The Alarm.com Smart Thermostat models ADC-T3000 and ADC-T2000 can be operated locally, in addition to their remote control features via the Alarm.com Customer Website and app. Locally Operating the ADC-T3000 Waking the Device * P…
Find the serial number on an Alarm.com Smart Thermostat
How to Find the Serial Number on an Alarm.com Smart Thermostat (ADC-T3000 / ADC-T2000) The serial number of an Alarm.com Smart Thermostat can be found either on the box it came packaged in or directly on the thermostat device. This number is required for setup, troubleshooting, or warranty (RMA) requests. Finding t…
Change the temperature display on the Smart Thermostat to Celsius or Fahrenheit
Change Temperature Units (°F/°C) on Alarm.com Smart Thermostats (ADC-T3000 / ADC-T2000) The Smart Thermostat (ADC-T3000 or ADC-T2000) displays temperature based on your System → Temperature Units setting on the Alarm.com Customer Website. Updating this setting changes the units everywhere: Customer Website, Custom…
Alarm.com Smart Thermostat (ADC-T3000) - Installation Guide
Alarm.com • ADC-T3000 Smart Thermostat Installation, Wiring & Setup Safety First — Turn OFF power to HVAC at the circuit breaker before installing or servicing. Leave power off until installation is complete. Do not short furnace/AC terminals to test. Follow local codes. Use only two AAA alkaline batteries o…
Factory reset an Alarm.com Smart Thermostat to its default settings
How to Factory Reset an Alarm.com Smart Thermostat (ADC-T3000 / ADC-T2000) The Alarm.com Smart Thermostat can be reset to its factory default locally at the thermostat. Important: If the thermostat is currently enrolled in a Z-Wave network, it must be removed from the network before performing a factory reset. Res…
