2GIG GC3 Image Sensor Transceiver (2GIG-XCVR3-GC3) - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Ima…
2GIG GC3 Panel Version 3.1 - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Pan…
2GIG GC3 Panel Version 3.1 - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Pan…
Adjust the Image Sensor PIR sensitivity on a 2GIG GC3
PIR sensitivity settings By default, the Image Sensor is configured with a standard motion sensitivity profile Normal . The sensor can also be set to a more sensitive motion profile (i.e., High ) and a less sensitive profile with pet immunity for pets up to 40 lbs (i.e., Low ). The sensitivity can be configured t…
Find the firmware version of a 2GIG GC3
The firmware version of a 2GIG GC3 can be found locally using the panel. To find the firmware version of a 2GIG GC3 using the control panel: * On the home screen, tap System Info and Usage . * Tap System Info . The firmware version displays.
Interact with a Z-Wave device from a 2GIG GC3
he 2GIG GC3 panel allows users to interact with Z-Wave lights, locks, thermostats, and garage devices locally at the panel. Note : Additional Z-Wave devices may be able to be added and controlled locally. For more information, refer to the device manufacturer. To interact with Z-Wave lights from a 2GIG GC3: * Tap…
Connect a 2GIG GC3 to a Wi-Fi network
The panel can be connected to a Wi-Fi network by either manually selecting the network or using Wireless Protected Setup (WPS). Once the system is connected to Wi-Fi, Dual-Path communication can also be enabled. For more information about enabling Dual-Path, see Enable or disable Dual-Path communication remotely . …
2GIG GC3 - Battery Replacement
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see 2GIG GC3 Panel - Installation Gui…
2GIG GC3 - Sensor Groups
Each sensor (wireless or wired) installed in the system is programmed to a specific sensor number and sensor type (zone). The sensor number identifies the specific sensor when it is displayed on the Control Panel, recorded in the event log, or reported to the monitoring station. This allows pinpointing information…
2GIG GC3 - Panel-specific app feature compatibility
Some features of the Alarm.com mobile app are available or unavailable depending on panel limitations. Arming app options Silent Arming Incompatible. Silent arming can only be done locally using the panel; remote commands adhere to the local setting. No Entry Delay Compatible. Remotely Bypass Sensors …
