Adjust the lens angle of the ADC-VC836
The lens angle of the Indoor/Outdoor Turret Camera (ADC-VC836) can be adjusted to optimize the viewing angle for different mounting positions. To adjust the lens angle: * If mounted, take the camera down. * Locate and loosen the set screw on the back of the camera. * Adjust the angle as necessary. * Tighten the…
Update the firmware on an ADC-VC836
The firmware of an Alarm.com video device can be updated remotely using the Partner Portal, MobileTech app, or Customer Website. Note : The Upgrade option only appears when there is an available update for the video device. To update the firmware using the Partner Portal: * Log into the Partner Portal . * Find…
Indoor/Outdoor Turret Camera (ADC-VC836) Installation Guide
Pre-setup checklist * ADC-VC836 camera (included) * AC power adapter (required for non-PoE connections) * Broadband (Cable, DSL or Fiber Optic) Internet connection with router * A computer or mobile device with Internet access * An Ethernet / Cat5 cable * Login and Password for the Alarm.com account to which y…
Which mounting brackets are compatible with the ADC-VC836 Indoor/Outdoor Turret Camera?
When installing the Indoor/Outdoor Turret Camera (ADC-VC836), it may be preferable to use a mounting bracket/accessory for certain types of installations. This camera is designed to be compatible with the mounting brackets of other popular turret cameras. Recommended mounting brackets * DS-1280ZJ-M Conduit Base *…
Indoor/Outdoor Turret Camera (ADC-VC836) Data Sheet
The ADC-VC836 from Alarm.com is a high performance fixed turret camera optimized for indoor and outdoor video monitoring. Its unique, compact design and outstanding HD quality video make the camera ideal for both commercial and residential video installations. The camera features a vandal-resistant exterior casing wi…
How do I access the mounting bracket for the ADC-VC836?
In order to access the mounting bracket for the Indoor/Outdoor Turret Camera (ADC-VC836), the plastic ring covering the bracket needs to be removed. To remove the plastic ring covering the bracket: * Turn the plastic ring counter-clockwise and slide up over the camera. * Once the plastic ring has been removed, th…
Factory reset an ADC-VC836 to its default settings
Reset Procedure Reset button location ADC-VC836 image Disconnect the camera from the power supply. Use a Phillips-head screwdriver to remove the water-tight door. Press and hold the Reset button while reconnecting power. Continue to hold the Reset button for 10 seconds. Important : After performing a fac…
