How does the ADC-VC826 connect to the internet?
The ADC-VC826 can be connected to the Internet with an Ethernet cable. When Power over Ethernet (PoE) is used, the power and internet connection are both supplied through the Ethernet cable by a PoE compatible networking device. Ethernet capabilities Important : To use this video device without PoE, an AC adapter m…
Indoor/Outdoor Dome (ADC-VC826) - Installation Guide
Pre-setup checklist * ADC-VC826 camera (included) * AC/DC power adapter (required for non-PoE connections) * Broadband (Cable, DSL or Fiber Optic Internet connection with router) * A computer or mobile device with Internet access * An Ethernet / Cat5 cable * Login and Password for the Alarm.com account to whic…
Where is the MAC address located on the ADC-VC826?
The MAC address is located on the sticker found on the ADC-VC826 mount and the bottom of the ADC-VC826 box. Note : The MAC address (not the SN number) is the number that is used for installation and finding the video device on the Partner Portal. The following image displays the sticker found on the ADC-VC826 d…
Factory reset an ADC-VC826 to its default settings
Reset procedure Reset button location Reset button image Hold the Reset button while reconnecting power. Continue to hold the Reset button for 10 seconds. There is no LED indication that a factory reset has been done, so be generous with time estimates. Important : After performing a factory reset, it …
Indoor/Outdoor Dome (ADC-VC826) - Data Sheet
Overview The ADC-VC826 from Alarm.com is a high-performance fixed dome camera optimized for indoor and outdoor video monitoring. Its discreet, compact design and outstanding HD quality video make the camera ideal for both commercial and residential video installations. The camera features a vandal-resistant exterior…
Update the firmware on an ADC-VC826
The firmware of an Alarm.com video device can be updated remotely using the Partner Portal, MobileTech app, or Customer Website. Note : The Upgrade option only appears when there is an available update for the video device. To update the firmware using the Partner Portal: * Log into the Partner Portal. * Find …
