Interact with Garage Doors from a Qolsys IQ Panel 2
The Qolsys IQ Panel 2 allows users to interact with Z-Wave Linear and LiftMaster garage door controls locally at the panel. Important : The panel must be on firmware version 2.4.0+ to interact with LiftMaster garage door solutions. Allow up to 5 minutes for the garage section to appear locally on the screen after up…
Qolsys IQ Panel 2 Secondary Tablet (IQ Remote) - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. Note : The IQ Remote can be enrolled into the IQ Panel 2 on firmwa…
Remotely Program a Sensor to a Qolsys IQ Panel 2
Sensors can be programmed to a Qolsys IQ Panel 2 remotely using the Partner Portal and MobileTech. Note : Device partitions can be configured on the Qolsys IQ Panel 2 with firmware 2.3.0+. For more information about partitions on the Qolsys IQ Panel 2, see How do multiple partitions work with the Qolsys IQ Panel 2?…
Qolsys IQ Panel 2 - Data Sheet
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 Plus Smarter Business Temperature Monitoring - Installation Guide
Alarm.com Smarter Business Temperature Monitoring (SBTM) provides affordable, 24x7 monitoring and real-time equipment alerts to support the temperature control needs of restaurants, grocery stores, pharmacies, and other business properties. Fully integrated with the Alarm.com ecosystem, our advanced temperature monit…
View sensor signal strength for the Qolsys IQ Panel 2
Sensor signal strength for the Qolsys IQ Panel 2 can be viewed using the Partner Portal and MobileTech app. Requirements This feature is only available for newer hardware. The user must have: * Qolsys IQ Panel 2 with firmware version 2.3.0+ * Security RF daughtercard with hardware revision above 0 To verify…
Qolsys IQ Panel 2 Plus - Quick Install Guide
The guides attached to this page have been written by a third party and are not maintained by TrueHomeProtection.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 - Quick Install Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Dialer delay settings for the Qolsys IQ Panel 2
Dialer delay settings depend on whether SIA limits are enabled. If SIA Limits are enabled: Default 30 seconds Minimum 15 seconds Maximum 45 seconds If SIA Limits are disabled: Default 30 seconds Minimum 0 seconds Maximum 254 seconds Configure SIA Limits To configure SIA Limits using the P…
What device IDs are Image Sensors enrolled in for a Qolsys IQ Panel 2?
Image Sensors can be enrolled in any available device ID on a Qolsys IQ Panel 2. Additional resources Enroll in the Interactive Services & Image Sensor 201 training course today! For more information on accessing Academy Training, see How can I access Academy Training? .
