Change the temperature display on the Smart Thermostat to Celsius or Fahrenheit
The Smart Thermostat (ADC-T3000 or ADC-T2000) displays temperature based on the system's account settings set on the Customer Website. For information about changing the temperature display on the security panel, refer to each panel's Change the temperature format (units) guide. To remotely change between the Cel…
Trane Z-Wave Thermostat (TZEMT400AB32MAA) - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click Trane Z-Wa…
Alarm.com Smart Thermostat is not controlling HVAC properly
The Alarm.com Smart Thermostat may run into an issue where: * It is not turning on heat or AC. * It only controls heat or AC and not both. * Heat or AC run continuously when it should not. Note : For non-Alarm.com thermostat configuration assistance, contact the device manufacturer. If the Alarm.com Smart Ther…
LUX KONOzw Smart Hub Thermostat (KN-ZW-WH1-B04) - Battery Replacement
The LUX KONOzw Smart Hub Thermostat uses four AA alkaline batteries. To replace the batteries in a LUX KONOzw Smart Hub Thermostat: * Separate the KONOzw from its base. * Insert the four included AA batteries. * Secure the KONOzw front onto the base.
Thermostat Heating and Cooling Health Report
Heating and Cooling Health Reports are a monthly status reports sent in the first week of each month for a customer’s HVAC system. It provides data on how much their HVAC system ran heating or cooling, statistics about performance and monthly temperatures, and a report card that overviews how the user interacts with…
Lennox iComfort Wi-Fi Touchscreen Thermostat - Integration Guide
Alarm.com supports Lennox iComfort Thermostats (E30, M30, S30) required for controlling Lennox's line of premium iComfort systems for heating, cooling, and humidity control. This is ideal for customers with iComfort systems already installed – now they can control their thermostats alongside other automation and sec…
2GIG Z-Wave Thermostat (CT-100) - User Guide
Alarm.com is choosing to end support for the 2GIG CT-100, the 2GIG CT-30, and the GE TSTAT-300 thermostats. It will not be possible to control those thermostats from the app or website for any new accounts created or accounts recycled after May 27th, 2018. Older accounts created before that date will not be affected.…
GoControl Thermostat (GC-TBZ48) - Battery Replacement
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see GoControl Thermostat (GC-TBZ48) -…
Enroll and configure the Alarm.com Smart Thermostat
Add or remove the Smart Thermostat To add or remove the ADC-T3000: If using a Z-Wave Security 2 (S2) and/or SmartStart-capable Z-Wave controller, see Add an S2-encrypted Z-Wave device or Add or remove a Z-Wave SmartStart-enabled device . If not, refer to the steps below: * Put the Z-Wave controller into…
Factory reset an Alarm.com Smart Thermostat to its default settings
The Alarm.com Smart Thermostat (ADC-T3000 or ADC-T2000) can be reset to factory default locally at the thermostat. To reset the thermostat: Important : If the thermostat is enrolled onto a Z-Wave network, remove the thermostat from the network prior to factory resetting. This action clears Z-Wave network informatio…
