Does the IQ Panel 2 have a secondary touchscreen keypad?
Sep 29, 2025
422
IQ Remote (Secondary Keypad) for the Qolsys IQ Panel 2
The IQ Remote is the secondary touchscreen keypad designed for the Qolsys IQ Panel 2. It communicates with the main panel over a secure Wi-Fi network and provides an easy way to arm/disarm and control your system from additional locations in the home or business.
IQ Remote vs. IQ2 (Important Difference)
- IQ Remote → for Qolsys IQ Panel 2.
- IQ2 (older accessory) → for the first-generation IQ Panel.
- Not interchangeable: IQ2 cannot be used with IQ Panel 2, and IQ Remote cannot be used with the first-generation IQ Panel.
Requirements
- Secure Wi-Fi connection: The IQ Remote communicates with the IQ Panel 2 over secure Wi-Fi.
- Firmware: IQ Panel 2 firmware 2.1.0+ is required for full compatibility and Alarm.com integration.
- The IQ Remote can enroll on firmware 2.0.3, but 2.1.0+ is required for the built-in panel camera and panel motion detector to appear in the equipment list.
- The IQ Remote itself does not appear as a peripheral device in the equipment list.
- Original power supplies: Use the factory power adapters included with both the IQ Panel 2 and the IQ Remote to ensure proper charging and reliability.
Install & Enroll (At a Glance)
Follow the manufacturer’s installation guide for full steps. Typical flow:
- Power the IQ Remote with its original power supply and connect it to the same secure Wi-Fi network as the IQ Panel 2.
- On the main panel, open Settings → Advanced Settings (installer/master code) and follow on-screen prompts to pair the IQ Remote.
- Confirm basic functions (arm/disarm, status) and allow a few minutes for full synchronization.
Notes & Tips
- Keep the IQ Remote and IQ Panel 2 on the same, stable Wi-Fi for best performance.
- If camera or motion entries aren’t listed, verify the panel is on firmware 2.1.0+.
- If Wi-Fi credentials change, update both the main panel and the IQ Remote.
