You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > True Protection > Alarm Systems > Qolsys > Qolsys IQ2 + Panel > Run Scenes from the Qolsys IQ Panel 2
Run Scenes from the Qolsys IQ Panel 2
print icon

Program Sensors Remotely on Qolsys IQ Panel 2

Note: Device partitions can be configured on the Qolsys IQ Panel 2 with firmware version 2.3.0+. 

Program Sensors Using the Partner Portal

  1. Log into the Partner Portal and locate the customer account.
  2. Click EquipmentSensors.
  3. Configure an existing device:

    • Click Advanced Sensor Settings.
    • Use the Filter by dropdown to select the device.
    • Edit the desired setting and enter the new value.
    • Click Change to apply updates.
  4. Add a new sensor:

    • Click Add A Sensor and enter all required information.
    • Click Add Sensor to enroll.
  5. Bulk add multiple sensors: (Partner Portal only)

    • Click Bulk Add Sensors.
    • Enter sensor details for each device.
    • Click Add Sensors to program them into the panel.
  6. Open, close, and tamper each device to ensure it works locally.

Configure Device Partitions in the Partner Portal

  1. Log into the Partner Portal and open the customer account.
  2. Click Equipment and choose Change for the device.
  3. From Choose an action, select Change Partition.
  4. Select the new partition from the dropdown and click Send Command.

Program Sensors Using the MobileTech App

  1. Log into the MobileTech app and select the customer account.
  2. Tap EquipmentSensors.
  3. Configure an existing device:

    • Tap Advanced Sensor Settings.
    • Select the device from the dropdown and edit the setting.
    • Enter the new value, then tap Change.
  4. Configure a device’s partition:

    • Tap Change Partition.
    • Select the desired partition and tap Change.
  5. Add a new sensor:

    • Tap Add a Sensor and enter all required information.
    • Tap Add Sensor to enroll.
  6. After adding, open, close, and tamper each device to confirm functionality.

More Resources

Feedback
0 out of 0 found this helpful

Attachments

Run_Scenes_from_the_Qolsys_IQ_Panel_2.pdf
scroll to top icon