You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > True Protection > Alarm Systems > Qolsys > Qolsys IQ2 + Panel > Interact with Garage Doors from a Qolsys IQ Panel 2
Interact with Garage Doors from a Qolsys IQ Panel 2
print icon

Qolsys IQ Panel 2 – Control Z-Wave & LiftMaster Garage Doors

Overview

The Qolsys IQ Panel 2 lets you view status and open/close compatible Z-Wave Linear and LiftMaster garage door devices directly from the panel.

Firmware requirement: For LiftMaster compatibility, the panel must be on firmware 2.4.0+. After updating, allow up to 5 minutes for the Garage section to appear on the screen.

Not supported: myQ Gate Openers are not currently supported for viewing or controlling status on the IQ Panel 2.

Control Garage Devices at the Panel

  1. Swipe to the Garage section on the home screen.
  2. View the current status of each paired garage door.
  3. Tap Open or Close to operate the garage door.

Setup Tips

  • Confirm the device is paired and shows in the device list after any firmware updates.
  • If the Garage section doesn’t appear after 5 minutes, refresh the panel UI or reboot once.
  • Keep the panel online (Wi-Fi/cellular) for smooth status updates and remote diagnostics.

Helpful Links

Feedback
0 out of 0 found this helpful

Attachments

Interact_with_garage_doors_from_a_Qolsys_IQ_Panel_2.pdf
scroll to top icon