IQ Remote Setup Guides Disclaimer
The guides attached to this page have been written by a third party and are not maintained by True Protection.
Important: Any questions regarding the installation, maintenance, or usage instructions in these guides should be directed to the device manufacturer.
Firmware Note
The IQ Remote can be enrolled into the IQ Panel 2 on firmware version 2.0.3. However, firmware version 2.1.0+ is required for the built-in panel camera and panel motion detector to appear in the equipment list. The IQ Remote itself does not appear as a peripheral device in the equipment list.
Need Support?
If you need assistance with your True Protection security system or IQ Panel 2 setup, use the links below: