How to Access the Mounting Bracket on the ADC-VC836 Turret Camera

The ADC-VC836 Indoor/Outdoor Turret Camera includes a protective plastic ring that covers the mounting bracket. To mount the camera, this ring must be removed and re-secured after installation.

Removing the Plastic Ring

1. Hold the camera securely in place.
2. Turn the plastic ring counter-clockwise until it loosens.
3. Slide the ring upward and lift it off the camera to expose the mounting bracket.

Mounting the Camera

With the mounting bracket exposed, you can now secure the camera to the desired surface. Make sure the bracket is firmly attached before proceeding.

Replacing the Plastic Ring

1. Once the camera is mounted, slide the plastic ring back down over the camera.
2. Turn the ring clockwise until it locks into place.
3. Confirm that the ring is secure to protect the bracket and provide a finished look.

Tips for Installation

• Always ensure the camera is mounted on a stable surface.
• Use weather-appropriate mounting hardware for outdoor installations.
• Double-check that the ring is locked in place to prevent exposure to dust or moisture.

Need More Help?

For additional installation guides and setup instructions, visit our Support Center or check out our full range of security cameras. If you need expert help, contact True Protection today.