128
The Schlage FE599 Z-Wave Lever Lock is only supported by security panels with a 300 series (or older) Z-Wave chip. The manufacturer will not be updating this lock, and Alarm.com will only continue to support this lock on these older systems. These systems include DSC/Interlogix modules (versions 185 or lower) and the GoControl1 and GoControl2 panels. We do not advise using this lock with any other system.
Instead of this device, Alarm.com recommends you install any of the other locks listed on the Alarm.com Ecosystem.
The Schlage Z-Wave Lever Lock (FE599) requires four AA batteries.
To replace the batteries in a Schlage Z-Wave Lever Lock (FE599):
- Remove cover screws and cover.
- Remove battery cover.
- Remove four old AA batteries.
- Replace batteries with 4 new, high-quality AA batteries. Reverse steps to replace the battery cover and lock cover.
Note: If the low battery does not automatically clear on the customer's equipment list, request an updated status from the lock using the Partner Portal or MobileTech app. For more information about requesting the status, see Request an updated status on Z-Wave devices.
