154
The content on this page has been written by a third party and is not maintained by Alarm.com.
Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer.
To access the full installation guide, see Schlage BE468 Touchscreen Deadbolt - Installation Guide.
The Schlage BE468 Touchscreen Deadbolt requires four high-quality alkaline AA batteries.
To replace the batteries in a Schlage BE468 Touchscreen Deadbolt:
- Remove the battery cover from the Inside Assembly.
- Unsnap the connector.
- Remove the battery tray.
- Install the alkaline AA batteries.
Caution: Lithium batteries may cause undesired operation and are not recommended.
- Carefully replace the battery tray, with the batteries facing the door.
- Snap the connector back into place.
- Install the battery cover.
Note: If the low battery does not automatically clear on the customer's equipment list, request an updated status from the lock using the Partner Portal or MobileTech app. For more information about requesting the status, see Request an updated status on Z-Wave devices.
