Schlage BE469 Touchscreen Deadbolt - Battery Replacement
Jun 03, 2021
161
The content on this page has been written by a third party and is not maintained by Alarm.com.
Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer.
To access the full installation guide, see Schlage BE469 Touchscreen Deadbolt - Installation Guide.
The Schlage BE469 Touchscreen Deadbolt requires four high-quality alkaline AA batteries.
To replace the batteries in a Schalge BE469 Touchscreen Deadbolt:
- Remove the battery cover from the alarm assembly.
- Unsnap the connector.
- Remove the battery tray.
- Install four high-quality alkaline AA batteries.
Caution: Lithium batteries may cause undesirable operation.
- Carefully replace the battery tray, with the batteries facing the door.
- Snap the connector back into place.
- Reinstall the battery cover.
Note: If the low battery does not automatically clear on the customer's equipment list, request an updated status from the lock using the Partner Portal or MobileTech app. For more information about requesting the status, see Request an updated status on Z-Wave devices.
