Kwikset 914 Deadbolt - Battery Replacement
May 21, 2021
154
|
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see Kwikset 914 Deadbolt - Installation Guide. |
The Kwikset 914 Deadbolt requires four AA batteries.
To replace the batteries in a Kwikset 914 Deadbolt:
- Verify the turnpiece is in the vertical position.
- Remove the lock cover.
- Remove the battery pack.
- Insert new AA batteries into the battery pack, ensuring correct polarity. For best results, use new non-rechargeable Alkaline batteries only.
- Slide the battery pack back into the lock panel.
- Reinstall the lock cover.
Note: If the low battery does not automatically clear on the customer's equipment list, request an updated status from the lock using the Partner Portal or MobileTech app. For more information about requesting the status, see Request an updated status on Z-Wave devices.
