Panel programming for the 2GIG GC3 can be configured locally using the panel or remotely using the Partner Portal or MobileTech app. 

To configure panel programming using the panel: 

1. On the home screen, tap System Settings. 
2. Enter the installer code. 
3. Tap Installer Toolbox. 
4. Tap System Configuration. 
5. Tap to select the setting to configure.
6. Configure the desired settings. 
7. Once complete, tap Return To System Configuration. 
8. Verify Save changes is selected, and then tap Exit. 

To configure panel programming using the Partner Portal: 

1. Log into the Partner Portal.
2. Find the customer account.
3. Click Equipment.
4. Click Panel.
5. In Panel Information, click View Panel Settings.
6. To configure panel programming, click .
7. To request current settings from the panel, click Upload All Devices.  

To configure panel programming using the MobileTech app: 

1. Log into the MobileTech app. 
2. Find the customer account.
3. Tap Equipment.
4. Tap Panel.
5. Tap Edit on a setting to configure it in panel programming remotely.
6. To request current settings from the panel:
   1. Tap to expand Panel Actions.
   2. Tap Upload All Settings.