How to Play Back Video Locally on the ADC-CSVR126

The Commercial Stream Video Recorder (ADC-CSVR126) can display live and recorded video on one or two monitors through its HDMI and/or VGA outputs. It supports viewing for all cameras associated to the recorder.

Note: Remote playback is also available through your account. For assistance, visit the True Protection Support Center.

Connect the ADC-CSVR126 to a Monitor

Connect up to two displays using the HDMI and/or VGA ports.
- Single display: Live and recorded video appear on the same monitor.
- Two displays: Recorded video appears on the primary monitor; live video appears on the secondary monitor.
Plug a USB mouse into either USB port to navigate the interface. (If no mouse is available, the control pad supports basic navigation.)

Tip: You can enable password protection for the local interface in your account settings. If you need help, see the Support Center.

Live Video Controls

Note: With two displays connected, live video appears on the secondary monitor.

Rearrange views: Click and drag live video panes; the layout is saved after reboot.
Change layout: Switch between grid options to show more or fewer cameras; cycle pages if you have more cameras than visible panes.
Rotate cameras: Start or stop automatic camera rotation.
Full screen: Expand any live view to full screen.

Recorded Video Controls

Note: With two displays connected, recorded video appears on the primary monitor.

Timeline: Drag the slider to select a date and time for playback.
Timeline scale: Zoom in/out to change the playback scope.
Create clips: Mark start/end to export a video clip (see “Export Status” below).
Skip: Jump backward or forward (e.g., 30 seconds).
Reverse/Play: Play footage backward or resume normal playback.
Speed control: Slow down or speed up playback.
Split screen: View multiple cameras simultaneously during playback.
Full screen: Expand recorded video to full screen.

Access Recorded Video from the Local Interface

Log in to the local interface (if password protected).
Open the menu and select Playback.
Choose the Camera you want to review.
Select a Date/Time to begin playback.

System Functions

Factory Reset: Restore default settings if required. For guidance, see the Support Center.
Power Menu: Log out, shut down, or restart the recorder.
Export Status: View progress for clips you have queued for export.

Need More Help?

For setup assistance, troubleshooting, or professional support, visit True Protection Support or contact us.