How to Rack Mount the ADC-CSVR126 Using the ADC-RME101 Kit

The ADC-CSVR126 Commercial Stream Video Recorder can be securely mounted in a standard server rack using the ADC-RME101 rack mount kit (sold separately). The included brackets allow the CSVR126 to fit into a 1U rack unit space for a clean and professional installation.

Rack Mount Specifications

A rack unit (1U) is 1.75 inches (44.45 mm) tall. While the height is fixed, server rack width and depth can vary. The ADC-RME101 brackets are designed to adapt to most standard server racks.

What’s Included in the ADC-RME101 Kit

Mounting brackets (x2 – one for each side)
Screws (x6 – three per bracket)

Additional Hardware Required

ADC-CSVR126 recorder
ADC-RME101 rack mount kit
Standard server rack
Server rack screws (typically provided with the rack)

Step-by-Step Mounting Instructions

Unbox the ADC-RME101 kit and identify the brackets and screws.
Align the three small holes on one bracket with the screw holes on one side of the ADC-CSVR126.
Using the included screws, attach the bracket securely to the device.
Repeat the process on the opposite side with the second bracket.
Position the CSVR126 into the rack and use server rack screws to secure each side of the recorder.

Tips for Best Installation

Ensure the rack mount screws are tightened evenly to avoid strain on the brackets.
Leave adequate ventilation space above and below the CSVR126 for proper airflow.
Label the rack position for easy identification and servicing in the future.

Need More Help?

For additional installation resources, visit the True Protection Support Center. For details on the CSVR126 itself, check the Security Camera Systems section or contact True Protection for professional installation assistance.