ADC-VDB770: Alarm.com Next-Generation Video Doorbell Camera
The ADC-VDB770, part of the Alarm.com Design Studio Series, offers a 150° vertical field of view to capture the entire doorway area. With Two-Way Audio, Video Analytics, and HDR video quality, this doorbell camera provides smarter alerts and clearer visibility, even in challenging conditions.
Key Features
- 150° vertical × 115° horizontal FOV
- Full HD resolution (1440 × 1920) with HDR
- IR night vision up to 15 ft
- Video Analytics for accurate people detection & fewer false alerts
- Two-Way Audio via the mobile app (requires version 4.14+)
- Battery heater for reliable low-temperature operation
- Enhanced Wi-Fi range with 2×2 antenna
- Works with existing mechanical and digital chimes
Included Accessories
- Angled mounting wedges
- Power module (required for installation)
- Mounting brackets
- Wire connectors & extenders
Optional Accessories
- Video Doorbell Touchless Cover (ADC-VDBA-COVER)
- Video Doorbell Touchless Mat (ADC-VDBA-MAT)
- Video Doorbell Temperature Collar (ADC-VDBA-TC)
- Video Doorbell Wall Power Supply Kit (ADC-VDBA-PSU-DC)
- Video Doorbell Mounting Wall Plate (ADC-VDBA-WP)
Accessories can be ordered via the Partner Portal. See: User Guide Documents.
Specifications
Compression | H.264 |
Ingress protection | IPX4 |
Max resolution | 1440 × 1920 |
Image sensor | 1/2.7" CMOS, 5 MP |
Lens / FOV | 150° vertical, 115° horizontal |
Low-light sensitivity | 0 lux with IR |
IR range | Up to 15 ft (5 m) |
Adjustments | Flip, brightness, contrast, saturation, sharpness, exposure |
Wireless | 802.11 b/g/n/ac, 2.4 & 5 GHz |
Operating temp | -22°F to 104°F (-30°C to 40°C) |
Operating humidity | < 95% (non-condensing) |
Dimensions | 1.7" × 5" × 1.5" (42 × 127 × 38 mm) |
Motion detection | Video Analytics only (no PIR sensor) |
Power (AC) | 16–30 VAC, 10–30 VA |
Power (DC) | 15–30 VDC, 8W minimum |
*Power module included with the ADC-VDB770 is required for every installation.
Status Light Guide
LED Pattern | Description |
---|---|
Off | Power off |
Solid red | No local or Internet connection |
Blinking red | Power on, booting |
Solid green | Connected to Alarm.com |
Blinking green | Local network connection |
Double-blinking blue | Unable to ring indoor chime |
Blinking blue | WPS mode (press & hold 30–45s) |
Blinking white | Wi-Fi Access Point mode (press & hold 45–60s) |
Blinking yellow | Power cycling (press & hold 60–75s) |
Alternating red & green | Factory reset (press > 75s) |
Note: Holding the button will also trigger the indoor chime if enabled. Disable chime first in the Customer Website if needed.
Learn More
Discover more about Doorbell Cameras, browse Support Center guides, or Contact True Protection for professional installation help.